New Products For 2017

 
1 - 22 of 22 items

FHBRH060 Brake Rotor And Flate Plate Flex Hones

FHBRH060 Brake Rotor And Flate Plate Flex Hones

Flex Hones will deliver a superior finish on brake rotors, flywheels, and flat plates (60-Grit Size). Use with a 3/8" drill motor at 600 to 1000 RPM.

  • Price: $46.04

FHBRH120 Brake Rotor And Flate Plate Flex Hones

FHBRH120 Brake Rotor And Flate Plate Flex Hones

Flex Hones will deliver a superior finish on brake rotors, flywheels, and flat plates (120-Grit Size). Use with a 3/8" drill motor at 600 to 1000 RPM.

  • Price: $46.04

FHBRH240 Brake Rotor And Flate Plate Flex Hones

FHBRH240 Brake Rotor And Flate Plate Flex Hones

Flex Hones will deliver a superior finish on brake rotors, flywheels, and flat plates (240-Grit Size). Use with a 3/8" drill motor at 600 to 1000 RPM.

  • Price: $46.04

HO-1 Honing Oil 1-Gallon Size

HO-1 Honing Oil 1-Gallon Size

Fine Quility Honeing Oil. ( 1-Gallon Container) This oil is specificly compounded for keeping stones clean and free cutting. Reduces time and increases stone life. Honing oil is clear and sulfar free.

  • Price: $24.50

HT900-331 Phase II Rockwell Hardness Tester

HT900-331  Phase II Rockwell Hardness Tester

(Part No. HT900331). This hardness tester comprises the very best in "state of the art" design along with dynamic precision. Harness tester is easy to operate, yet engineered to obtain accurate readings. Conforming to ASTM E-18 Rockwell hardness...

  • Price: $2,195.00

M4245/Kit 1/2HP Baldor Motor (Spec 33026)

M4245/Kit 1/2HP Baldor Motor (Spec 33026)

Part No. M4245/Kit 1/2-HP Baldor Motor (Spec. 33026) 220-Volt 1-Phase 50 Hertz 10,000RPM-(Open Type) with hardware. This motor is face mounted and is used on sanders & polishers with face mounted designes. Motor can be wired clockwise or...

  • Price: $398.00

MP4000 40-Ton Metalpro Iron Worker

MP4000  40-Ton Metalpro Iron Worker

  (Part No. MP4000)  Here is a lower cost alternative to more expensive fabrication equipment.  It punches, sheers, notches, presses, forms and bends fast and accurately.

  • Price: $2,695.00

PHT1800 Phase II Portable Hardness Tester

PHT1800  Phase II  Portable Hardness Tester

(Part No. PHT1800). The Phase II portable hardness tester is designed to test hardness of large hard metal parts. Loaded with useful functons only found in high priced models. This tester is clearly setting a new industry standard by being the...

  • Price: $1,495.00

MP4000FS 40-Ton Metalpro Iron Worker W/Foot Switch

MP4000FS  40-Ton Metalpro Iron Worker W/Foot Switch

 (Part No. MP4000FS)   The MP4000FS does the same as the MP4000 except it has a foot switch for faster cycling of shearing and bending operations. 

  • Price: $3,395.00

MP4500FS 45-Ton Metalpro Iron Worker W/Foot Switch

MP4500FS  45-Ton Metalpro Iron Worker W/Foot Switch

 (Part No. MP4500FS)   The MP4500FS does the same as the MP4000 except it has a foot switch for faster cycling of shearing and bending operations with 45-Tons. 

  • Price: $4,195.00

MD60HP/1"BR/220V Electric Hand Polisher (220-Volt )

MD60HP/1"BR/220V  Electric Hand Polisher (220-Volt )

Part No. MD60HP/1"BR/220V) Electric sander & polisher comes with a special (spec. 33086) 1/2-hp Baldor (open- air induce) 220-volt, 1-phase, 50-Hertz. 

  • Price: $715.00

MD64HP/1"BR/220V Electric Hand Polisher (220-Volt )

MD64HP/1"BR/220V  Electric Hand Polisher (220-Volt )

Part No. MD64HP/1"BR/220V) Electric hand held sander comes with a special(spec. 33086) 1/2-hp Baldor (open- air induce) 220-volt, 1-phase, 50-Hertz .  (Machine can be setup for clockwise or counter-clockwise rotation of sanding belt).

  • Price: $723.00

MD70HP/1"BR/220V Electric Hand Polisher (220-Volt )

MD70HP/1"BR/220V  Electric Hand Polisher (220-Volt )

Part No. MD70HP/1"BR/220V) Electric hand held sander & polisher comes with a special designed (spec. 33086) 1/2-hp Baldor (open- air induce) 220-volt, 1-phase, 50-Hertz 10,000rpm motor . 

  • Price: $740.00

HP72121E/complete Machined Bracket Assy.-Complete

HP72121E/complete  Machined Bracket Assy.-Complete

New replacement 5/16-18 and 3/8-16 threaded bracket complete with new inlet spacers. Bracket comes with 1-set inlet spacers and large and small locking knobs.

  • Price: $85.00

HP72121E/inlet spacers- only (1-set)

HP72121E/inlet spacers- only (1-set)

(Part No. HP72121E/inlet spacers).  New aluminum inlet spacers for HP72121E machine roller bracket. These spacers come in a set and can be replaced as you need them.

  • Price: $12.50

K4146 Small Star Knob- Complete

K4146  Small Star Knob- Complete

Small Star lockingknob for all aluminum sliding brackets using 5/16-18 threads.

  • Price: $4.50

K4147 Large Star Knob- Complete

K4147  Large Star Knob- Complete

Large star knob knob for all aluminum sliding brackets using 3/8-16 threads.

  • Price: $6.50

1/2HP Baldor Motor (Spec 26445B) Carter Motor (Spec. MUB1002SF)

1/2HP Baldor Motor (Spec 26445B) Carter Motor (Spec. MUB1002SF)

1/2-HP Baldor Motor (Spec. 26445B) Carter Motor (Soec. MUB1002SF)- (Face Mounted Type) 110-Volt 1-Phase 10,000RPM-Open Type. 

Note: All motors are warranted by the manufacturer

  • Price: $428.00

M4252/Kit 1/2HP Baldor Motor-Universal (Spec. 33097 )

M4252/Kit 1/2HP Baldor Motor-Universal  (Spec. 33097 )

1/2-HP Baldor Motor (Spec. 33097) (Foot Mounted Type) 110-Volt 1-Phase 10,000RPM-Open Type. This motor is universal and will run clockwise or counter clockwise rotation. 

Note: All motors are warranted by the manufacturer

  • Price: $410.00

1/2HP Baldor Motor (Spec 33086) Carter (Spec KMUB1002BF)

1/2HP Baldor Motor  (Spec 33086) Carter (Spec KMUB1002BF)

Part No. M4258/Kit 1/2-HP Baldor Motor (Spec. 33086) Carter Motor Spec. KMUB1002BF) 220-Volt 1-Phase 50-Hertz 10,000RPM-(Open Type) with hardware.

Note: All motors are warranted by the manufacturer

  • Price: $413.00

S26302/Kit Hvy.Duty 10-AMP. On & Off Switch With Hardware

S26302/Kit  Hvy.Duty 10-AMP. On & Off Switch With Hardware

Replacement 10-amp on & off switch for MD electric sanders and polishers. This kit includes switch, switch plate, electrical connectors  and related hardware for replacement. (Comes with s26308 boot cover).

  • Price: $33.00

VKI5MM Valve Keeper Installing Tool for 5MM Valve Stems

VKI5MM  Valve Keeper Installing Tool for 5MM Valve Stems

VKI5MM  Valve keeper installing tool for 5MM valve stems

  • Price: $30.00
1 - 22 of 22 items