Metalpro Ironworker Accessories
-
-
Round Punch and Dies Sets For MP Ironworkers (34)
-
Round Punch and Die Sets for MP 4000 & MP4000FS & MP4500 Ironworkers
-
-
Square Punch and Dies Sets For MP Ironworkers (27)
-
Square Punch and Die Sets for MP 4000 & MP4000FS & MP4500 Ironworkers
-
-
Oblong Punch and Dies Sets For MP Ironworkers (17)
-
Oblong Punch and Die Sets for MP 4000 & MP4000FS & MP4500 Ironworkers
-
MP40PSP1016 Die & Punch Table For MP4000 Machines
-
-
Part No. MP40PSP1016 Here is a bolt on table for your MP4000 and MP4000FS Metalpro ironworkers. Table has three slots for bolting on quides to make setups fast and easy.
-
- Price: $189.00
-
MP4110 8" Bending Brake for 40-Ton Ironworkers
-
-
(Part No. MP4110) Here is a 8" bending die brake that bend 1/4" thick by 8" wide mild steel parts up to 90-degrees. Max 20-tons (Can be used with MP4000 and MP4000FS Ironworkers.)
-
- Price: $580.00
-
MP4150 Pipe Notch Housing Only
-
-
(Part No. MP4150 ) Pipe Notch Housing Only
-
- Price: $240.00
-
MP45PSP1016 Die & Punch Table For MP4500 Machines
-
-
Part No. MP45PSP1016 Here is a bolt on table for your MP4500 and MP4500FS Metalpro ironworkers. Table has three slots for bolting on quides to make setups fast and easy.
-
- Price: $175.00
-
MP4120 Heavy Duty Flat Angle Notcher
-
-
(Part No. MP4120 ) Heavy duty flat notcher can me used for notching angle iron up to 1/4" thick mild stee . Dies will cut 2" x 1-3/4" deep for put two pcs. of angle iron to be welded.
-
- Price: $635.00
-
MP4130 Standard Duty Flat Angle Notcher
-
-
(Part No. MP4130 ) Standard duty flat notcher can me used for notching anle iron up to 3/16" thick mild steel. Dies can notch angle iron 1" x 3/4" deep in up to 3/16" mild steel.
-
- Price: $165.00
-
MP4151 1/2" Pipe Notch Die
-
(Part No. MP4151 ) 1/2" Pipe Notch Die for notching round pipe for welding
-
- Price: $415.00
-
MP4152 3/4" Pipe Notch Die
-
(Part No. MP4152 ) 3/4" Pipe Notch Die for notching round pipe for welding structual frame
-
- Price: $415.00
-
MP4153 1" Pipe Notch Die Set
-
-
(Part No. MP4153 ) 1" Pipe Notch Die Set for notching round pipe for welding structual frame (Note: Does Not Include MP4150 Housing- order separately)
-
- Price: $415.00
-
MP4154 1-1/4" Pipe Notch Die
-
(Part No. MP4154 ) 1-1/4" Pipe Notch Die for notching round pipe for welding structual frame
-
- Price: $415.00
-
MP4155 1-1/2" Pipe Notch Die
-
(Part No. MP4155 ) 1-1/2" Pipe Notch Die for notching round pipe for welding structual frame
-
- Price: $415.00
-
MP4156 2" Pipe Notch Die
-
(Part No. MP4156 ) 2" Pipe Notch Die for notching round pipe for welding structual frame
-
- Price: $415.00
-
MP4510 12" Bending Brake for 45-Ton Ironworkers
-
-
(Part No. MP4510) Here is a 12" bending die brake that bend 1/4" thick by 12" wide mild steel parts up to 90-degrees. Max 25-tons
-
- Price: $749.00
